1/4" (6mm) with Surface Applied Safety Film - Category II Impact / Safety Rated
MATERIAL: 1/4" (6mm) polished wire glass (diamond pattern) with surface applied safety film
VISION FRAME MODEL: LoPro
INSTALLATION: with GT-18, 1/8" (3.2mm) fire rated glazing tape (supplied loose) to both sides of glass
CLASSIFICATION MARKINGS: Permanently etched with U.L. mark in compliance with
NFPA-80 revised
FIRE TESTED: 20 minute:
Approved listing at 2994 sq. in. visible lite 45 minute:
Approved listing at 1296 sq. in. visible lite 60/90 minute:
Approved listing at 100 sq. in. visible lite
1/4" (6mm) Clear - Category II Impact / Safety Rated
MATERIAL: 1/4" (6 mm) Specially Tempered Clear.
VISION FRAME MODEL: LoPro
INSTALLATION: FireSAFE-20 shall be glazed into the appropriate fire rated framing with GT-18, 1/8" fire rated glazing tape (supplied loose), to both sides of glass.
CLASSIFICATION MARKINGS: Permanently etched with U.L. mark in compliance with
NFPA-80 revised
FIRE TESTED: 20 minute:
Approved listing at 2584 sq. in. visible lite (without hose stream)
MATERIAL: 5/16" nominal (8mm) clear ceramic laminated with 2 pieces of PREMIUM or STANDARD FireLite and a proprietary interlayer
VISION FRAME MODEL: LoPro
INSTALLATION: with GT-132, 1/32" (.793mm) fire rated glazing tape (supplied loose) to both sides of glass
CLASSIFICATION MARKINGS: Permanently etched with U.L. mark in compliance with
NFPA-80 revised
FIRE TESTED: 20/45/60 minute:
Approved listing at 3204 sq. in. visible lite 90 minute:
Approved listing at 2034 sq. in. visible lite 180 minute:
Approved listing at 100 sq. in. visible lite
3/16" (5mm) Clear with 3M Safety Film - Category II Impact / Safety Rated
MATERIAL: 3/16" (5mm) clear ceramic with surface applied safety film.
STANDARD (non-polished) with a slight distortion or PREMIUM (polished) with maximum clarity.
VISION FRAME MODEL: LoPro
INSTALLATION: with GT-18, 1/8" (3.2mm) fire rated glazing tape (supplied loose) to both sides of glass
CLASSIFICATION MARKINGS: Permanently etched with U.L. mark in compliance with
NFPA-80 revised
FIRE TESTED: 20/45/60 minute:
Approved listing at 3204 sq. in. visible lite 90 minute:
Approved listing at 2034 sq. in. visible lite 180 minute:
Approved listing at 100 sq. in. visible lite
MATERIAL: Available in thicknesses 3/4" (19mm) to 2-3/8" (62mm) based on fire rating and interior or exterior application. Uses multiple layers of float glass laminated with transparent intumescent interlayers
VISION FRAME MODEL: LoPro-IS or FGS-IS (over 1" (25mm) thickness)
INSTALLATION: with GT-116, 1/16" (1.6mm) fire rated glazing tape to both sides of glass. Glaze with setting blocks to support the glass (by others).
CLASSIFICATION MARKINGS: Permanently etched with U.L. mark in compliance with
NFPA-80 revised
FIRE TESTED: Barrier to Radiant Heat 45/60/90/120 minute:
Approved listing at 3724 sq. in. visible lite
STC RATED: 40 dB (3/4" / 19mm) to
46 dB (1-9/16" / 40mm for interior use)
1" (25mm) Insulated Unit - Category II Impact / Safety Rated
MATERIAL: 1" (25mm) insulated unit, incorporates 5/16" (8mm) FireLite Plus with 1/4" (6mm) Tempered Glass. Other types available (see Technical Data Sheet).
VISION FRAME MODEL: LoPro-IS
INSTALLATION: with GT-132, 1/32" (.793mm) fire rated glazing tape (supplied loose) to both sides of glass
CLASSIFICATION MARKINGS: Permanently etched with U.L. mark in compliance with NFPA-80 revised
FIRE TESTED: 20/45/60 minute:
Approved listing at 3204 sq. in. visible lite 90 minute:
Approved listing at 2034 sq. in. visible lite 180 minute:
Approved listing at 100 sq. in. visible lite
