Security Door Louvers
Search
Vision Frames / Lite Kits | Door Louvers | Glazing Products | Edges & Astragals  
       
PLSL
Louver with Security Grille, Non-Vision Inverted Split “Y”
MATERIAL:
Frame: 12 GA (2.5mm) C.R.S.
Security Grille: 12 GA (2.5mm) C.R.S.
Blades: 20 GA (1.2mm) C.R.S.
FINISH: Grey Primer, Beige or Bronze Enamel
INSTALLATION: By drilling 1/4" (6mm) holes thru the door, around the perimeter of the cutout, installing with thru bolts having a blank head on one side for a flush appearance.
DOOR THICKNESS: 1-3/4" (44mm) is standard.
OPTIONAL FEATURES: Galvanized, Stainless Steel, Custom Baked Enamel Paint Colors, Insect or Bird Screen, Security Screws
Hurricane / Windstorm Approval: w/ U.L. mark
ASTM E330, E1886, E1996
Complies with Florida Building Code Standards
 
Technical Data
FLDL-UL-SG2
Fusible Link Louver with Security Grille Both Sides
MATERIAL:
Frame: 12 GA (2.5mm) C.R.S.
Security Grille: 12 GA (2.5mm) C.R.S.
Blades: 18 GA (1.2mm) C.R.S.
FINISH: Grey Primer, Beige or Bronze Enamel
INSTALLATION: By drilling 1/4" (6mm) holes thru the door, around the perimeter of the cutout, installing with thru bolts having a blank head on one side for a flush appearance.
DOOR THICKNESS: 1-3/4" (44mm) is standard.
FIRE TESTED: with U.L. mark
20/45/60/90 minute: Approved Listing
OPTIONAL FEATURES: Galvanized, Stainless Steel, Custom Baked Enamel Paint Colors, Security Screws
Hurricane / Windstorm Approval: w/ U.L. mark
ASTM E330, E1886, E1996
Complies with Florida Building Code Standards
 
Technical Data



     
 
Product Features
Screws for Security Door Louvers

Other Models Available

FLDL-UL-SG1 Fusible Link Louver with Security Grille One Side
DSFP Security Grille Face Plate
DSFP-Perf Perforated Security Grille Face Plate
 
     

       
 
Standard
Door Louvers

Specialty
Door Louvers

Security
Door Louvers